Device:
Samsung GALAXY Note 3
Rooted Android KitKat 4.4.2
SM-N9005
Files:
1. cm-11-20140320-UNOFFICIAL-temasek-hlte-V56.zip, for updates go to CyanogenMod 11 (Unofficial)Temasek kernel
2. gapps-kk-20140105-signed.zip, for updates go to CyanogenMod Google_Apps
Instructions:
- Make sure handset is rooted and battery is at least 80% charged
- Make sure USB Debugging is enabled from the Developer option of the handset
- Make sure ClockWorkMod Recovery 6.0.4.7 is installed
- Copy the two files (as is, not extracted) to the root folder of the handset's SD card.
- Turn off handset , by pressing power button and turn-off- Put the handset in Recovery mode by holding VolumeUp+Home+Power to boot.. Then confirm by selecting Continue using the Volume button and press Power to confirm selection
- In CWM, Perform Wipe data/factory reset. To do so, tap on Wipe and scroll down to Swipe on "Yes - Wipe all user data" option. Data wipe complete.
- Then perform a wipe cache partition scroll and do a swipe on "Yes - Wipe Cache" option. Cache wipe complete
- Goto advanced
- Select Wipe dalvik cache, select "Yes - Wipe Dalvik Cache" option to continue. Dalvik Cache wiped.
- Select Go Back
- Select Install zip, then select"choose zip from /storage/extSdCard" where your ROM is copied.
- Select the ROM cm-11-20140320-UNOFFICIAL-temasek-hlte-V56.zip file you copied earlier to your handset's SD card. Scroll to the bottom of screen and swipe on "Yes - Install cm-11-20140320-UNOFFICIAL-temasek-hlte-V56.zip" option to begin installing the firmware. Installing update.
- Repeat the previous step to flash Google Apps gapps-kk-20140105-signed.zip as well. GApps Installation Complete! Install from sdcard complete.
- Go Bck
- Once Google Apps is also installed, select reboot and then tap on "reboot system now" to reboot your phone. Your handset will restart longer
- Setup handset upon reboot
Showing posts with label Hack. Show all posts
Showing posts with label Hack. Show all posts
Friday, March 21, 2014
Saturday, January 25, 2014
Install ClockWorkMod Recovery 6.0.4.7 on Samsung GALAXY Note 3 SM-N9005 Android KitKat 4.4.2
Device:
Samsung GALAXY Note 3
Rooted Android KitKat 4.4.2
SM-N9005
Files:
1. n9005-cwm-recovery-6.0.4.7-kk(0125).tar, for updates go to CWM Based Recovery 6.0.4.7 at XDA forum
2. Odin v3.09
Instructions:
- Make sure handset is rooted and battery is at least 80% charged
- Make sure Reactivation Lock is off (Settings->General->Security)
- Make sure USB Debugging is enabled from the Developer option of the handset
- Download and extract/unzip the two files
- Disconnect handset from your computer if connected via USB.
- Turn off handset , by pressing power button and turn-off- Put the handset in Download mode by holding VolumeDown+Home+Power to boot.. Then confirm by selecting Continue using the Volume button and press Power to confirm selection
- Connect the handset to your computer via USB. Wait if drivers are being installed.
- Start Odin3 v3.09.exe as an Administrator
- In Odin, a message showing "Added!!" will appear.
- In Odin, Click the AP button, and select n9005-cwm-recovery-6.0.4.7-kk(0125).tar
- Make sure Auto Reboot and F. Reset Time are checked. While the Repartition is NOT checked
- Click the Start button
- Odin will start processing and wait for handset to boot.
- Once complete a PASS message and green message will appear from Odin.
- handset can be disconnected, handset is rooted.
Samsung GALAXY Note 3
Rooted Android KitKat 4.4.2
SM-N9005
Files:
1. n9005-cwm-recovery-6.0.4.7-kk(0125).tar, for updates go to CWM Based Recovery 6.0.4.7 at XDA forum
2. Odin v3.09
Instructions:
- Make sure handset is rooted and battery is at least 80% charged
- Make sure Reactivation Lock is off (Settings->General->Security)
- Make sure USB Debugging is enabled from the Developer option of the handset
- Download and extract/unzip the two files
- Disconnect handset from your computer if connected via USB.
- Turn off handset , by pressing power button and turn-off- Put the handset in Download mode by holding VolumeDown+Home+Power to boot.. Then confirm by selecting Continue using the Volume button and press Power to confirm selection
- Connect the handset to your computer via USB. Wait if drivers are being installed.
- Start Odin3 v3.09.exe as an Administrator
- In Odin, a message showing "Added!!" will appear.
- In Odin, Click the AP button, and select n9005-cwm-recovery-6.0.4.7-kk(0125).tar
- Make sure Auto Reboot and F. Reset Time are checked. While the Repartition is NOT checked
- Click the Start button
- Odin will start processing and wait for handset to boot.
- Once complete a PASS message and green message will appear from Odin.
- handset can be disconnected, handset is rooted.
Monday, January 13, 2014
Root Samsung GALAXY Note 3 (SM-N9005) Firmware 4.4.2 KitKat using CF-Auto-Root
Device:
Samsung GALAXY Note 3
Android KitKat 4.4.2
SM-N9005
Firmware N9005XXUENA4
Just a precaution:
1. Remove Phone Encryption
2. Remove SD Encryption
3. Backup needed files e.g. pictures, etc
4. Remove lock screen password
Files:
1. CF-Auto-Root-hlte-hltexx-smn9005.zip, for updates go to CF-Auto-Root site
2. Odin v3.09
Instructions:
- Make sure USB Debugging is enabled from the Developer option of the handset
- Download and extract/unzip the two files
- Disconnect handset from your computer if connected via USB.
- Start Odin3 v3.09.exe as an Administrator
- Turn off handset , by pressing power button and turn-off
- Put the handset in Download mode by holding VolumeDown+Home+Power to boot.. Then confirm by selecting Continue using the Volume button and press Power to confirm selection
- Connect the handset to your computer via USB. Wait if drivers are being installed. A message showing "Added!!" will appear.
- In Odin, Click the AP button, and select CF-Auto-Root-hlte-hltexx-smn9005.tar.md5
- Make sure Auto Reboot and F. Reset Time are checked. While the Repartition is NOT checked
- Click the Start button
- Odin will start processing and wait for handset to boot. Once complete a PASS message and green message will appear from Odin.
- handset can be disconnected, handset is rooted.
Samsung GALAXY Note 3
Android KitKat 4.4.2
SM-N9005
Firmware N9005XXUENA4
Just a precaution:
1. Remove Phone Encryption
2. Remove SD Encryption
3. Backup needed files e.g. pictures, etc
4. Remove lock screen password
Files:
1. CF-Auto-Root-hlte-hltexx-smn9005.zip, for updates go to CF-Auto-Root site
2. Odin v3.09
Instructions:
- Make sure USB Debugging is enabled from the Developer option of the handset
- Download and extract/unzip the two files
- Disconnect handset from your computer if connected via USB.
- Start Odin3 v3.09.exe as an Administrator
- Turn off handset , by pressing power button and turn-off
- Put the handset in Download mode by holding VolumeDown+Home+Power to boot.. Then confirm by selecting Continue using the Volume button and press Power to confirm selection
- Connect the handset to your computer via USB. Wait if drivers are being installed. A message showing "Added!!" will appear.
- In Odin, Click the AP button, and select CF-Auto-Root-hlte-hltexx-smn9005.tar.md5
- Make sure Auto Reboot and F. Reset Time are checked. While the Repartition is NOT checked
- Click the Start button
- Odin will start processing and wait for handset to boot. Once complete a PASS message and green message will appear from Odin.
- handset can be disconnected, handset is rooted.
Thursday, December 26, 2013
Enable USB Debugging Mode on the Android
Make sure Developer Options is enabled.
Go to Settings -> Developer Options.
Enable USB debugging by checking this option.
Go to Settings -> Developer Options.
Enable USB debugging by checking this option.
Thursday, December 19, 2013
Subscribe to:
Posts (Atom)